The Ladies Tux


I made this black lace jumpsuit, which is my version of a ladies tux for the Tessuti Cut Out Lace Competition late last year. Unfortunately I didn’t win any of the prizes with it, but taking part in the competition was a lot of fun and I got a nice evening style jumpsuit out of it.


The lace fabric is from Tessuti in Melbourne. It’s a cotton/polyester blend and despite the pattern going through it, easy to sew. The fabric came in panels. I bought 3 panels for this jumpsuit just to be sure I would have enough to match and mirror the pattern where needed.


My inspiration for the sleeves of the jumpsuit was a jacket I saw by Carolina Herrera in black lace. The sleeves were just the thing I was looking for! Although the sleeves on her jacket are quite a lot more voluminous and longer than mine. I wanted mine be somewhere between three quarters and seven eighths long.


I used Vogue V1471 by Nicola Finetti for the top of the jumpsuit. I had no idea whether the plunge in the front was too deep or not because I didn’t bother making a muslin to try it out before cutting into the limited amount of lace I had.


I used Simplicity 1665 for the pants and extended them by about 5cm to make sure they went down to my ankles. I measured  the length I thought the pants should be but was still risking it a bit because I wanted the edge to be on point in length, as I was using the selvage with the dotted pattern as my hem. I measured and remeasured and remeasured again until I was 100% sure it was the right length before cutting. There was no room for error! It just wouldn’t have looked nice if the edging had been sewn on. It had to be in one piece.


Cutting the pattern out was pretty scary because I could not afford for any mistakes to happen. I only had the three panels to use very cautiously and didn’t want to end up buying more.


I was tossing up between lining the whole thing in skin coloured dance fabric or just lining the bodice in skin coloured fabric and the legs in black. I opted for black legs because I thought it would look too risqué if it looked like it was skin coloured everywhere. I think I made the right decision in hindsight, especially if I really plan to wear it anywhere!


So for the legs, I used black taffeta as lining and beautifully soft skin coloured dance fabric for the bodice as lining. I didn’t line the sleeves to save time and felt it wasn’t necessary.


To make the bell sleeves, I sewed the bottom part of the bell sleeve with the dotted pattern to the top gathered part and then attached them to the main sleeve. To give the sleeves a rounded shape and make them stand out a bit, I used black boning that I encased into the seam of the top and bottom of the ruffled sleeve by hand stitching it in place.


The decollete did end up being somewhat more revealing than I would have liked it to be, so I used the dotted pattern in the lace to cover up a bit of exposed flesh (!) by sewing it into the seam in the front and around the back. Even though it is quite narrow, I do find it helps to cover up at least a little and adds more to the overall look by repeating the dotted pattern on the sleeve and pant edges.


The most challenging thing about making this jumpsuit, was to make sure the pattern matched up perfectly where it should and having enough of the fabric to do so. I was always playing around with the pattern pieces before cutting to make sure I was getting the best part of the pattern on each piece.


I pretty much used up most of the fabric and only have bits and pieces left that I still hope to utilise in some way for a small something.






When I was sewing this jumpsuit, I was very unsure of whether I would like it or not. Every time I tried it on to check for fit and adjustments, I thought: I am either going to love it or hate it when it’s finished. Well, I have to say I do love it, which surprised me because I really thought it would be the opposite. I just have to have an event to wear it to now!


I am happy with the matching up of the lace pattern in the front and back. I put in a very long invisible zip to make sure I could get in and out of the jumpsuit comfortably and also to keep the pattern in the lace as undisturbed as possible when zipped up.


To neaten up the inside, I used a skin coloured dance fabric to line the bodice. It’s very soft, stretchy and comfortable to wear. The inside of the arm holes are finished off with black bias binding.


I have to admit, I am in a kind of jumpsuit phase at the moment! I am loving all kinds of jumpsuits: long legged, short, strapless, casual, formal. Anything jumpsuit style! I do hope the fashion sticks around for a while. Do you like jumpsuits too?


LOCATION: the backyard!

STYLING: necklace and bracelet: Zara, sunglasses: Margot by Tom Ford, shoes: Zara.

Striped Set

Anyone who has been following my blog for a while now will have very quickly realised that I am definitely a dress person when it comes to sewing. But in everyday life, I DO wear pants, shorts and jeans and not very often, but sometimes I actually do make these too! I haven’t had much luck in sewing well fitted pants in the past, so I am a bit wary of making them. Nevertheless, after a whole lot of dresses, it was time to make and blog something a little different.

Even though I am not your tallest person, I absolutely adore wide legged, palazzo and flared pants. Especially the 70s type.  I know they look better on taller people than myself, but I still love them! I tried to elongate the legs of these as much as possible by making them almost down to the ground.

For this set, I used an original 70s pattern by Teal Traina for the pants and matched them with a strapless top using a modern strapless dress pattern by Kwik Sew, cutting it off about 25 cm below the waist.



My fabric comes from Tessuti in Melbourne – a beautiful linen/cotton blend in a navy denim look and white stripe. It has a great thickness and drape to it. The stripes are horizontal on the fabric. But I wanted vertical stripes on my pants, so I risked it and cut them out against the grain. I was afraid that the fabric would stretch or go out of shape while wearing the pants because I had cut it against the grain, but luckily, it seems to be holding it’s shape.

The pants were very easy and quick to make. They are darted into an inside ribbon waistband and I used an 18cm invisible zip in the back to close them off. No fussing around.

When it came to the top, I didn’t want the it to have all the stripes going in one direction and definitely not all vertical, because it would just be too boring. I thought it would make it visually more interesting if the stripes middle front and centre back were horizontal and the rest vertical.

The strapless top took a bit more time to make up than the pants. I cut the top using size S and should have known that it was too big for me from the last time when I used this same pattern for my Capri dress. But I was in a rush and thought better be safe than sorry if XS ended up being too small. I will know better next time!

To underline the top, I used a nice, old cotton bed sheet that I had put aside for lining. It had outlived its use as bed linen, but was still very good quality, fine cotton and a shame to throw away. I used two layers of the cotton bed linen as underlining and at first thought it would be too much, but two layers turned out to be a good amount to give the top a good shape and thickness.

I took in each seam until the top fit me in a snug way. Then I contemplated which type of zip to use. I couldn’t use an invisible one, because I wouldn’t be able to get a fitted top on and off without an open end zip. So I bought the shortest open end zip in navy blue I could find and was going to put it in the centre back. But the zip was too long for the back and I didn’t want to cut it and potentially ruin it. I was playing around with it in front of the mirror and by pure stroke of genius found that it had the perfect length to go in the front side seam. I hadn’t seen that before, so why not be different?

The zip was a perfect fit and even though I didn’t put in a hook and eye or button in at the top, it stays in place very well without opening.

To finish off the top on the inside, I didn’t line it but used bias binding to finish off the edges neatly. I thought there were enough layers of fabric in it already with the underlining and it didn’t need any more thickness to it.

After having a look at these photos, I realised that I would need to put some boning in the back of the top to keep any folds from forming. Sometimes you see things in your finished product that need improving after you think the job has been done! Not my favourite thing to do…


I think my new matchy matchy set has worked out well. It really was a very rushed job, but the fit is perfect and also very comfortable to wear.

I don’t know about you, but I really like matching tops and bottoms. They are a bit like twin sets of a different kind. I definitely have plans to make some more matching sets of tops and pants and also tops and shorts.

Now that the evenings are very long here in Melbourne after our winter time change, I plan to do lots of sewing. Reality is  that after work and my regular running during the week, I am so tired that don’t get much done at all!

Keep smiling and sewing until next time (hopefully very soon)!

STYLING: hat – Borsalino, Rome, shoes – Windsor Smith, sunglasses – Carlina Square by Chloe, ring – Apart Fashion

LOCATION: Elmore, Victoria

Heidi in the Mountains – Vintage Simplicity 7431


Lay ee odl lay ee odl lay hee hoo here comes my Heidi dress! This dress is appropriately named Heidi because we photographed it in the beautiful, mountainous region of Bavaria, Germany, while on our holiday.

I found this stunning 70’s pattern while browsing through Etsy and couldn’t wait for it to arrive! It took about 5 weeks to reach me from Canada and the seller and I thought it had gone missing in the post. But when it did finally get here, I went hunting for the perfect fabric. The things that really grabbed me when I first saw this pattern were the colour white, the long dress, the big collar, the halterneck and the big pockets – a lot of 70s elements that I just adore! I love the cover dress in white, so white it had to be!

DSC_4465  DSC_4466

White Waffle Pique FabricI was after a fabric with some texture to make it more interesting, preferably a natural fibre. Tessuti in Melbourne came to the rescue with it’s white waffle pique fabric in 100% cotton. I got some for the dress and realised that I had looked at the pattern for the short version of the dress and not the long one! So after playing around with the pattern pieces in every possible position, I managed to just, just squeeze out the maxi dress! After I was finished making it, I ordered some more of this gorgeous fabric for a top because of the beautiful quality. Lucky I did, because soon after it was sold out!



The skirt has a front panel, two side panels and the back panel is split in two to accommodate the zip. So there are no side seams as in most typical dresses/skirts.

The bodice with it’s curvy pattern pieces is fully interfaced with the waffle pique and the pockets are cut on the bias, which is why you need so much fabric! I underlined the skirt part of the dress and the pockets in a white cotton voile, to give it a bit more shape and structure. This took more time and the skirt could have done without it because the fabric isn’t too thin, but I couldn’t help myself! I tend to underline almost everything these days! I somehow always want to get the runway look in my clothes. The designers seem to present their collections with their garments looking like they sway with the body and have a kind of soft “stiffness”, if you know what I mean. I read somewhere that some designers don’t always line their garments, but most do underline them.



The sewing itself is pretty straight forward. There is quite a bit of top stitching to do and I was debating on whether I should do it or not due to the texture in the waffle pique fabric, but thought “what the heck” and went ahead with it. I do think it looks better with top stitching as it defines the bodice more than without it.


I used a special top stitching thread in white that needed to be tested out first, as the tension on my machine was just not doing it for me. In the end, the top stitching is not flawless but I can live with it. I underlined the big 70s pockets (love big pockets!) as well and they too are topstitched around the edges and the top.

It was nice to see the bodice come together bit by bit and after I had done the top stitching on it, I felt it was a small work of art! It has a good shape, form and fit.


The dress has a self-belt that I made but didn’t put on for the photos. I am not sure I will ever wear it just because I think it covers too much of the nice “V” shape in the front waist where there also happens to be a lot of top stitching. Not sure what the designers were thinking there when they designed it…


I bought this pattern in size 10, which is a perfect fit for me without any alterations, except for the length, as I am not the tallest person at only 161cm! I admit I am pretty lazy when it comes to making too many changes and am lucky that most patterns fit me well enough not to have to alter too much about them.


There is already some denim fabric in my stash waiting to be made up in the knee-length version of this dress at some point during this coming summer (hopefully). It will be more wearable than a long white dress  (I know, I know…) but I couldn’t resist when I saw the pattern photo. I have a real weakness for white clothing! I don’t always make clothes for practical reasons. A lot of the time I will make something with a real passion and fervor just because I love the look of it and the challenge of making it myself with my own spin on it here and there.



I REALLY wanted to put in an invisible zip in the back of the dress, but that was near to impossible because of the thickness of the fabric with all the top stitching. I personally prefer the zip to be as invisible as possible but had to give in to a standard dress zip this time. I’m not entirely happy with the look of it, but it will have to do… :-(. The halterneck closes via two buttons at the nape of the neck.



This is definitely a garden party style dress. Just have to wait for the garden party season to start! Melbourne weather is pretty up and down this spring…





Fairytale Neuschwanstein Castle in Bavaria


Beautiful Bavaria!

DSC_8477   DSC_8564

DSC_8570   DSC_8609

STYLING: sunglasses: Carlina square by Chloe, necklace: Magnolia silver jewellery, bracelet: Witchery, ring: Apart Fashion

LOCATION: Bad Hindelang, Bavaria, Germany